 |
| Old and New framing in the walls in the following pics. There are more by clicking on the trailer picture on the home page. |
 New floor and all floor plates repaired. New bottom wall studs with glue and pocket hole screws. Left skin off until all bottom front, back and sides completed. |
 |
| New wall gusset over door with front edge of wall plate installed. Made a pattern for the wall plate and cut it in a single piece for both sides of the trailer. |
 |
| Upper wall plate instead of how Shasta did their plate. Way stronger. Rafter glued and screwed to plate as well. |
 |
| Rear wall plate installed to corner post. |
 |
| Add caption |
 |
| As you can see from the pics I used a bit more wood than Shasta. More is better Right? I'm pulling this with a Suburban, not a Model T, bet I can handle a touch more weight. |
 |
| Add caption |
No comments:
Post a Comment